View Homework Help - 4.1.3.5 Packet Tracer - Configuring IPv4 and IPv6 Interfaces Instructions from BSCS 3 at Alabama A&M University. Packet Tracer - Configuring IPv4 and IPv6. 4.1.3.5 Packet Tracer - Configuring IPv4 and IPv6 Interfaces CISCO - CCNA Routing and Switching - Routing and Switching Essentials Packet Tracer. Step 2: Configure the two customer LAN switches. Configure the IP addresses on interface VLAN 1 on the two customer LAN switches. Make sure to configure the correct default gateway on each switch. Step 3: Configure the PC interfaces. Configure the IP address, subnet mask, and default gateway settings on PC-Aand PC-B.

Packet Tracer - Configuring IPv4 and IPv6 Interfaces

4.1.3.5 Packet Tracer - Configuring IPv4 and IPv6 Interfaces. View Lab Report - 4.1.3.5 Packet Tracer - Configuring IPv4 and IPv6 Interfaces Instructions from MSIS 647 at Touro College. Packet Tracer - Configuring IPv4 and IPv6 Interfaces Topology Addressing.

Addressing Table

1.1.3.5 Packet Tracer - Configuring Ipv4 And Ipv6 Interfaces Answers

Objectives
Part 1: Configure IPv4 Addressing and Verify Connectivity
Part 2: Configure IPv6 Addressing and Verify Connectivity
Background

4.1 3.5 Packet Tracer Configuring Ipv4 And Ipv6 Interfaces Dhcp

Routers R1 and R2 each have two LANs. Your task is to configure the appropriate addressing on each device and verify connectivity between the LANs.
Note: The user EXEC password is cisco. The privileged EXEC password is class.
Part 1: Configure IPv4 Addressing and Verify Connectivity
Step 1: Assign IPv4 addresses to R1 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R1 LAN interfaces, PC1 and PC2. The serial interface has already configured.
Step 2: Verify connectivity.
PC1 and PC2 should be able to ping each other and the Dual Stack Server.
Part 2: Configure IPv6 Addressing and Verify Connectivity
Step 1: Assign IPv6 addresses to R2 and LAN devices.
Referring to the Addressing Table, configure IP addressing for R2 LAN interfaces, PC3 and PC4. The serial interface is already configured.
Step 2: Verify connectivity.
PC3 and PC4 should be able to ping each other and the Dual Stack Server.
Configuration R1:
cisco
enable
class
configure terminal
interface g0/0
ip address 172.16.20.1 255.255.255.128
no shutdown
interface g0/1
ip address 172.16.20.129 255.255.255.128
no shutdown
exit
!
Configuration R2:
cisco
enable

4.1 3.5 Packet Tracer Configuring Ipv4 And Ipv6 Interfaces Protocols

class
configure terminal
interface g0/0

4.1 3.5 Packet Tracer Configuring Ipv4 And Ipv6 Interfaces Setup

ipv6 address 2001:DB8:C0DE:12::1/64
ipv6 address FE80::2 link-local
no shutdown
interface g0/1
ipv6 address 2001:DB8:C0DE:13::1/64
ipv6 address FE80::2 link-local
no shutdown
exit
!
Configuration PC1:
Configuration PC2:

Configuration PC3:
Configuration PC4:

END!~!